| S/N |
Topics |
Authors |
| 1 |
Models for assessment and prediction of the hardness of the heat affected zone in aluminum weldment |
C. I. Nwoye, C. N. Anyakwo |
| 2 |
Limiting stresses and elastic properties of biological material under axial and radial compression a |
C. C. Ihueze, E.C. Okafor |
| 3 |
Mathematical model for the prediction of the compressive strength characteristics of concrete made w |
I.E. Umeonyiagu, I.O. Onyeyili |
| 4 |
Investigation of properties of oil palm empty fruit bunch fiber in the strength and fracture perform |
A.N. Anyakora, E. Mudiare, H.O. Chibudike, O.A. Adeyoju |
| 5 |
Modeling and analysis of single phase transfer field motor |
O.A. Ezechukwu, O. Kingsley |
| 6 |
A smoker equation based algorithm for binary distillation design calculations |
E.C. Osoka, C.I.O. Kamalu |
| 7 |
Dynamic effects of the ratio of applied/natural frequency on the amplitudes of joint displacements o |
G. C. Ezeokpube, V. M. Nwokike |
| 8 |
Mathematical modelling and simulation of solar drying of cassava |
J.T. Nwabanne, V. N. Okafor |
| 9 |
Software approach to correlation analysis of natural gas production and disposal data recorded from |
G. C. Oguejiofor, U. J. F. Ewurum |
| 10 |
Optimal approaches to robust design for industrial wastes |
C.C. Ihueze, C.C.Okpala, C.C. Obiuto |
| 11 |
Effect of fiber loading and surface treatment on flexural strength of polyester matrix reinforced wi |
A.N. Anyakora, O. K. Abubakre, E. Mudiare |
| 12 |
Mathematical model for the prediction of the compressive strength characteristics of concrete made w |
I.E. Umeonyiagu, I.O. Onyeyili |
| 13 |
Analysis of inhibition of cassava wastewater degradation by cyanide |
I.M. Jideofor, J.C. Agunwamba |
| 14 |
Augmentation of carburized mild steel weld properties to control chafing incidence |
J. I. Achebo |
| 15 |
Chemophysical characterization of clay soil used for locally manufactured burnt bricks in Makurdi, B |
A.N. Amah, I. Ahemen, A. Kur |
